Home > News > Content
600m Depth Truck Mounted Water Well Drilling with Rotary Table
Jun 28, 2016

We recommend you the 600m Depth Truck Mounted Water Well Drilling with Rotary Table.


Features

1. The truck chassis adopts the special crane chassis of brand SINO TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.

2. This water well drilling rig is a rotary drilling rig with directional circulation. It is equipped with mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.

3. The power of truck engine transfer to PTO, and then drive drilling rig.

4. The main drive of this water well drilling rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.

5.  According to client’s requirement, the water well drilling rig can carry out down-the-hole hammer drilling with Air Compressor.

6.  It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, and geothermic well and other foundation working. It is popular at home and abroad.

Technical Data

Drilling depth(M)

600

Drilling diameter(mm)

200-500

Speed of turntable(r/min)

117;102;60;38;22;13;16(reverse)

Torque of turntable(KN.m)

5.4---50

Single rope lifting capacity of main windlass(KN)

50

Maximum lifting capacity of main windlass(KN)

300

Single rope lifting capacity of assistant windlass(KN)

60

Single rope lifting capacity of assistant windlass(KN)

240

The lifting capacity of hook(KN)

300

Bearing capacity of drilling tower (KN)

360

The height of drilling tower (mm)

12500

Drill pipe

Kelly barmm

108×108×7500

Assistant pipe (mm)

Ф89×10×6000

WB3NB-130

Mud pump

Liner Diameter (mm)

100-140

Stroke of piston (mm)

160

Theoretical flow (L / S)

8.4  10.3   12.2

 14.3   16.6

Rated pressure (Mpa)

10    8     7     6     5

Diameter of suction tube

152mm

Diameter of discharge pipe

65mm

Input power  kW(HP)

95 (130)

Truck chassis

Drive form

8×4

Engine

Model

YC6A260-33YC water -cooled four stroke diesel engine

Rated power(KW)

191


Speed (r/min)

2300

Size (L*W*H)(mm)

11510*2480*2800

The highest speed(Km/h)

75

Weight (kg)

25500

Transport size(L*W*H)(mm)

12550*2500*4150


For more information,please contact us and visit our website:www.rejeedrilling.com.


Products List